I would definitely try pulling the front panel off an then reinstalling
it, possibly with a few drops of Deoxit on the pins. It isn't difficult
at all, and I think it's worth a try.
73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
CWops no. 5
http://www.qsl.net/k2vco/
On 06/06/2020 7:33, Jim McCook wrote:
Ted, thanks for the note. I checked the error list immediately after
the failure and thought about that EPROM failure as a possibility. The
power supply is fine. The radio had been powered up and failed while I
had dinner. I know there are some pin connectors to the front panel
that could be the problem, but I don't want to attempt to pull it off,
so will probably wind up sending it to the EC hospital for a general
face lift in addition to the fix unless there is a simple fix. I doubt
one exists. Thanks, Jim
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
