Gottlieb, Jonathan wrote: > Help! Yesterday, the frequency display on my K2 #5113 stopped > functioning properly. When I turned off the K2 I was on 14185.09. When > I turned the K2 back on later in the day, it read 14063. Now, every > time I turn the radio on, I see 14063 on 20M no matter what frequency I > was on when I turned it off. Same problem on every other band, no > matter what frequency I was on when I turned off the radio, it turns > onto a particular frequency when I turn it back on, for example, > 18143.90 on 17, 7241.09 on 40. Any ideas on how to fix this?
The K2 manual says: Backup Timer While you're moving the VFO, a 30-second data backup timer is being continuously re-started. Once you have completely stopped tuning the VFO for at least 30 seconds, the K2 will then save your current operating frequency in EEPROM. As long as you stay on a particular frequency, no further updates will be done. ... so the simple answer is "wait 30 seconds without tuning, you impatient so-and-so" :-) -- "Nosey" Nick Waterman, G7RZQ, K2 #5209. use Std::Disclaimer; [EMAIL PROTECTED] Everything put together falls apart sooner or later. -- Simon's Law _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
