My observations are similar. With 2.10, the LED peaks now consistently match the numerical readings on my LP-700 digital power meter, The blue LCD power readings no longer reflect PEAK power on sideband. Rather they go up & down in a blur and thus are unreadable. In key down tune operations, the LCD power numbers accurately match the LP-700.
73 Torrey N9PY (#52) -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Roy Morris, Jr. via Elecraft Sent: Saturday, March 30, 2019 10/22:57 PM To: Elecraft Reflector <[email protected]> Subject: [Elecraft] KPA1500 v. 2.10 After loading v.2.10 the LEDs seem to show the correct power level at or near the 1500 watt level. At reduced power levels the LEDs stream faster but seem to also show the correct power level. The blue display window does not show the correct power level. It consistently shows a very low power level. Roy Morris W4WFB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
