I have exactly Mike Morrow's problem, and wonder if he ever got it resolved. Mike, if you are still around I'd like to hear what your resolution was.
I am awaiting arrival of an RF Probe kit so I can do signal testing to attempt to trace down my problem. In the meantime I have looked over my board to the point it's invading my dreams, and I do not see any visible problem with the installation of any of the parts, with special attention to: Q9, Q1, R11, R12, L1, C2. I did see that I had not firmly seated U1, and corrected that: I was hoping that would do the trick, but it did not - still get the E42 code. It just seems to me that as everything tested out fine up until the installation of the L1 Toroid and the C2 capacitor (I'm using 68 pF disc for the 80 kHz range), that the issue should be centered there. I've confirmed the 33 turns on the toroid, and fiddled with the it's placement. I'm wondering if the winding direction makes a difference in the functioning of L1 - there is no picture of it in the manual, only a reference back to previous toroids, and I have wound it to match them. I've also confirmed continuity of the windings on L1. Lastly, I will reveal my testing ignorance here by mentioning my multimeter does measure frequency, but I am not sure if that applies in this case: ie, would that function as an RF Probe if I understood how to use it? I purchased my K1 18 years ago directly from Eric Schwartz when Elecraft was still quite young and I was active in the Santa Cruz County Amateur Radio Club. It is great to see how the company has grown and prospered! It wasn't until settling into retirement that I mustered up the courage to tackle building this project. If anyone has any theories on the K1 VFO failure issue other than those already offered, please clue me in. 73, Tom Johnson KQ7TJ (formerly KQ6DV) -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
