Two transceivers is a typical contesting setup. I do not believe that you are contester so it would probably have little value to you. Typically a two radio station on operator setup (SO2R) has one transceiver on one band and the other on a different band with filters to protect the receivers. With super human operating skills very high run rates are possible: https://www.youtube.com/watch?v=bIW1Z1uFbRw&t=259s
John KK9A Mark Wheeler mark3575 at icloud.com I see lots shack photos with two transceiver setups, especially two Elecraft K3S radios; how do you isolate the 2nd transceiver or SDR receiver (SDR Play, for example) so that you do not damage one transceiver while transmitting with the other? I am assuming there is a way to use both radios at the same time. Can I safely use an antenna switch to switch between multiple transceivers using one antenna, or will I risk damaging the non-transmitting radio on the other side of the antenna switch? If there is a way to do this can anyone explain their setup? Thanks. Mark WU6R ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
