Dick, Thanks. Mark
On Jan 01, 2019, at 07:46 AM, Dick Dievendorff <[email protected]> wrote: I just googled “bandpass filter so2r” and found a number of useful discussions and product references on this topic. 73 de Dick, K6KR On Jan 1, 2019, at 04:34, Mark Wheeler via Elecraft <[email protected]> wrote: I see lots shack photos with two transceiver setups, especially two Elecraft K3S radios; how do you isolate the 2nd transceiver or SDR receiver (SDR Play, for example) so that you do not damage one transceiver while transmitting with the other? I am assuming there is a way to use both radios at the same time. Can I safely use an antenna switch to switch between multiple transceivers using one antenna, or will I risk damaging the non-transmitting radio on the other side of the antenna switch? If there is a way to do this can anyone explain their setup? Thanks. Mark WU6R ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
