When the KAT500 is powered on but in the Bypass mode will it still open the key line to the KPA500 at the preset level (3.0:1 in my case) if the load suddenly goes above 3:1?
The situation is a remote autotuner connected to a 33’ vertical that I use for bands that I do not have a resonant antenna. On those bands the KAT500 is in the BYP mode. A remote switch brings all of the antenna choices in on a single coax which connected to the KAT500. 73 - Mike - K9JRI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
