Skip,
The P3 span is the same in both cases (20kHz). If your P3 is set to
Tracking mode, you can expect that if your K3 VFO has been changed from
7030kHz to somewhat above that frequency (VFO frequency is always in the
middle of the display).
If your P3 is in Fixed mode, I believe it should stay fixed to your
selected frequency span with no change, but I have not verified that is
true. If you are in Fixed mode and it changes, I do not have an answer
for that.
73,
Don W3FPR
On 8/31/2018 6:07 PM, Fred Jensen wrote:
FW: 1.60
Fixed Tune mode
No SVGA
Connected to K3 RS-232 serial port
The "span window" on my P3 will often move up by exactly 5 KHz when I
change bands. For example, on 40 with a 20 KHz span and the span window
going from 7020 to 7040, if I go to another band and then come back to
40, the span will now be 7025 to 7045. Is this normal? Have I missed a
menu option?
It does this most of the time, sometimes the span window stays put where
I left it. I think it has some connection to where in the span window
the cursor is, but so far, I haven't been able to reverse engineer
that. I'd really like it to retain whatever span window limits I've set
for each band.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
