If using a dynamic mike you should not have any connection to pin #6
anyway. So it would make no difference. The BIAS On and Off applies
to the back panel mike connection.
73
Bob, K4TAX
On 8/24/2018 10:53 AM, TL_Netvision wrote:
Hello all,
While trying different front microphones (Dynamic & Electret) I noticed that
8v on pin 6 of the mic socket is always present no matter if I set bias to
on or to off.
What am I missing please?
73, Isaac, 4Z1TL
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
