Thanks for reminding me to look at dumb things.
Yes, the BNC was pugged into the tuner board. Note that the
radio has been working well for a while. I ran FT8 in New
Hampshire using it in April/May. The most recent venture into
the inside was to pull the batteries to recover from a hung
firmware load. That load worked after getting other programs and
the PX3 out of the way.
73 Bill AE6JV
On 6/18/18 at 5:29 PM, [email protected] (Grant Youngman) wrote:
Probably a dumb question, but did you unplug the jumper from
the BNC connector to the main board and plug it into the tuner board?
Grant NQ5T
K3 #2091, KX3 #8342
On Jun 18, 2018, at 8:04 PM, Bill Frantz <[email protected]> wrote:
AE6JV
-----------------------------------------------------------------------
Bill Frantz | Truth and love must prevail | Periwinkle
(408)356-8506 | over lies and hate. | 16345
Englewood Ave
www.pwpconsult.com | - Vaclav Havel | Los Gatos,
CA 95032
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
