I've got my k3s rs232/p3 port connected to the panadapter XCVR rs232 port. Panadapter PC rs232 is connected to the computer. Set the panadapter RS232 paramater to 4800 baud. The elecraft k3 utility on the computer talks to the K3S fb and connects at 4800 baud but neither my n1mm software or dxlab commander, both configured at 4800 baud, will talk to the K3. If I take the panadapter out of the chain by hooking directly to the k3s rs232/p3 port directly they both talk to it fb. Has anyone run into a similar problem? Thanks for help, Gary SlagelAce Hardware #14814207 So ChicagoHot Springs, SD 57747(605) 890-2310KT0A ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
