Howard, Adding an internal preamp is not a trivial task as it would mean some surgery on the transverter board. What makes you think that you need a preamp? The sensitivity of the transverter is more than adequate for all normal use and any spare funds should be put into new low loss feeder and better antennas. If when all that is up and running you still require more sensitivity then a mast head preamp is the only way but caution is raised over using one of high gain as it is a balancing act between sensitivity and strong signal handling. Good luck with improving your system. 73 Peter G3SMT On 24/02/2018 12:42, Howard Sherer wrote:
Is there an easy way to add a pre amp into the receive line on the internal K3 2M transverter? Howard Sherer AE3T ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
