> No issues of that type here. These are my setup numbers: > > Baud Rate = Eight > > Stop Bits = one > > Handshake = None > > PTT method = CAT > > Mode = Data/Pkt > > Split = Rig > > Also under the Advanced tab: Miscellaneous > > TX Delay = 0.1 sec.
Here’s my latest attempt: Config: PTT — KEY = RTS - OFF VOX - Off Radio Panel: Poll Interval - 1s 38400 Eight Two None No Force Control Lines RTS Data/Pkg None Advanced Panel: Tx Delay = 0.1s Results: CQ Call #1 — K3S Transmit time = +1 second / Stop time = +4 seconds CQ Call #2 — K3S Transmit time = +1 second / Stop time = 0+ seconds CQ Call #3 — K3S Transmit time = +1 second / Stop time = 0+ seconds CQ Call #4 — K3S Transmit time = +1 second / Stop time = 0+ seconds CQ Call #5 — K3S Transmit time = 0 seconds / Stop time = 0+ seconds I was encouraged… then this popped up: When I clicked Cancel, WSJT-X quit. on previous appearances of the above I have clicked on OK, which took me back to the Radio panel. I tried Test PTT, and it seemed to work OK, and I had a green dot on the main window. This error message appears seemingly at random, whether I’ve been transmitting or the radio has sat untouched for several minutes. I’ve tried one stop bit, too, but it made no difference I could detect. This is no fun at all. Cheers! Richard Kunc — W4KBX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
