While attempting to get Z60A on 40M last night I ran into a problem that I never encountered before.
My KX2 has the built in auto ATU. I took the output from the rig into a QRP SWR/PWR bridge and then into my 40M EDZ and hit the "ATU" on the rig. "Click, Buzz" and the rig came up with a 1.0-1 SWR reading. HOWEVER, my QRP bridge was pegged in reverse indicating that there was no match. Earlier I had tried this set up on my 20M Yagi and it worked great. The rig gave me 1.0-1 and the analog meters on the QRP bridge did the same. The only thing I can think of is the 40M EDZ is the problem. I am going to try removing the QRP bridge and see if that makes a difference. In the mean time, anyone have a guess as to what I am seeing on 40M?? Vy 73 es gud DX! Rich Arland K7SZ Bent Dipole Ranch, Dacula, GA Author: "ARRL's Low Power Communications, the Art and Science of QRP" (all 4 editions) Cogito ergo CQ (I think therefore, I HAM) http://commobunker.blogspot.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
