Mike, it is clean on a dummy load; I guess I need to track down if I
have lost my ground somewhere, or find the feedback path...
73 de Dave, W5SV
On 8/6/17 00:13, Mike Flowers wrote:
Hi Dave,
Have you tried this using a dummy load? May be useful to eliminate RFI as a
cause.
-- Mike Flowers, K6MKF, NCDXC - "It's about DX!"
On Aug 5, 2017, at 9:26 PM, David F. Reed <[email protected]> wrote:
This did not used to happen; it is new to my set-up, nothing I am aware of has
changed...
When trying to operate JT65, if I set the power to 10 watts, everything is fine
(KXPA100 is not active).
If I set to anything above 10 watts (yeah, like 11 watts or more), I get bad RF
feedback (sounds like motor boating in monitor).
SWR via tune looks good, all cables have been taken out, checked and
re-inserted.
I am stumped and looking for hints as to what I ought to look at next, or
re-check or try.
Thanks & 73 de Dave, W5SV
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
--
שָׁלום עֲלֵיכֶם - עֲלֵיכֶם שָׁלום
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
