Don,
Looks like I'll have to do that as it is happening on TUNE. I was
trying to elimate all the obvious problems first.
73
Colin, G3PSM
On 29/07/2017 17:22, Don Wilhelm wrote:
Colin,
Does the K3 shut down operating into a dummy load when TUNE is
selected? If so, then there is a problem with your K3 - contact support.
If it operates fine into a dummy load in TUNE, then suspect a PA
temperature problem.
It may be that you have a bad PA, but again the folks at K3support can
help you with some checks to determine the real source.
73,
Don W3FPR
On 7/29/2017 9:40 AM, Colin wrote:
Mike,
Ignoring the mode in use, into a dummy load the K3 is shutting down
at power in excess of 40W on tune.
I'm using a 40A PSU and a new factory made power lead. I am
beginning to suspect the PA.
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
