This is the response I received from Elecraft support: On 06/27/2017 01:34 PM, Elecraft Support wrote: > To your question, yes, we are now using a drop of Locktite Blue (not > Red) on the threads for the 2 screws that hold the round contacts in > place.
John KN5L On 07/24/2017 10:45 AM, KENT TRIMBLE wrote: > The issue is not that the paddles don't leave the factory fully tested > and operational, but that the stand-offs (E700348) loosen after a period > of time from normal use. > > As posted by several of us previously, the fix is simply to place a > small dab of Loctite Blue on the threads of the two flathead screws > (E700277) which secure the stand-offs. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
