If Tommy is using a SignaLink, he will also have to set the
transmit and receive level pots on the SignaLink. I have always
set mine fully clockwise -- full on.
73 Bill AE6JV
On 7/22/17 at 1:38 PM, [email protected] (Neil Zampella) wrote:
Now you say you're not transmitting. What is the MIC setting
on the rig?? If you're using the Signalink to control the audio
to the RIG, you should have the MIC set up around 20 to 25 for
now. The WINDOWS speaker setting for the Signalink should be
at 100%, again since you're controlling the audio to the rig
via the signalink. You should then set the Tx POWER out on the
KX2 to what you want to use. Unlike other radios, the
KX-series (and I believe the K series) Tx power out is set on
the rig.
-----------------------------------------------------------------------
Bill Frantz | If the site is supported by | Periwinkle
(408)356-8506 | ads, you are the product. | 16345
Englewood Ave
www.pwpconsult.com | | Los Gatos,
CA 95032
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
