Actually, the rig control when using the KXUSB cable provides frequency
changes, as well as PTT and split control.
As far as the 'blank frequency list' .. all you need to do is RIGHT
CLICK in the frequency, and select RESET from the menu, the program will
then populate the list. When using WSJT-X and JT-Alert it logs to most
every local logging program like DXKeeper, or Log4OM, or online like eQSL.
FWIW why do you need to use a 'virtual' port with the K3 ??
Neil, KN3ILZ
On 7/21/2017 9:25 AM, brian wrote:
Rig control with WSJT is over rated. The only functionality I am aware
of is one click band change. I suppose if you uses its logging
capability, it would put the freq in there. However, the frequency
is the same for all QSO's within a band.
The present release for FT8 only has a blank frequency list.
So one doesn't even get that functionality.
I never got WSJT to work over a LPBRIDGE virtual port with the K3. It
only works via a direct connect port. WSPR has the same problem.
So I do without the above and manually log QSO's in the logging
program window. With JT65 that was fine. The higher QSO rate with
FT8 makes this more of a pain.
The above simply reflects my experience. I'd be happy to hear about
workarounds others have found.
73 de Brian/K3KO
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
