How about using the KPod to tune VFO B and then have a macro that swaps A/B. Or just run SO2V.
________________________________ From: Elecraft <[email protected]> on behalf of Dave Fugleberg <[email protected]> Sent: Sunday, January 15, 2017 7:44 PM To: Elecraft List Subject: [Elecraft] K-Pod question When the K-Pod was first introduced, there was some indication that a future enhancement would allow it to control the P3 - specifically, to adjust the markers and 'tap to QSY'. Is this feature available yet, or imminent? I discovered that the P3 is pretty useful for unassisted search and pounce in last weekend's RTTY contest - While working one station on VFO-A, I'd move marker A up to the 'mark' tone of the next RTTY signal up the band. As soon as the QSO was logged, a tap on the P3 knob would jump to the next station to work. Then move Marker A again and repeat. With a little practice, and the SPAN set fairly narrow, I could nail the tuning every time, provided I didn't bump the P3 knob when tapping it. Although that worked well, it was a lot of reaching to the P3. It would be a BIG improvement if a K-Pod, right next to the keyboard, could control those functions. Can it? 73 DE W0ZF ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
