Bob,
The list of error codes start on page 68 of the
K3 manual.
ERR EFX does not exist, but ERR TXF is valid - it says the filter
configured for transmit is not valid.
That is relatively easy to see with K3 Utility - Configuration tab,
Configure Xtal Filters.
The filter for CW, DATA, SSB must be the 2.7 or 2.8 kHz filter.
For ESSB it needs to be the 6Khz filter and AM can use either the 6kHz
or 13kHz filter
And for FM it must be the 13kHz filter.
Is there any chance he has turned on ESSB mode in the menu and does not
have the 6kHz filter installed?
73,
Don W3FPR
On 12/31/2016 5:40 PM, Bob Gibson via Elecraft wrote:
Hi Fellows.. I have a friend that I'm trying to help.. he is 85 years old and
has a k3. He turned on the radio today and got a err exf message... or he may
have said err txf. not sure.. I told him I would try to help him.. he is in
OKLA and I'm in Florida so it is not easy.. Can someone please tell me what the
message means.. and I will call him back. He is a very dear ham buddy of 60
years. Thanks 73s Bob W5RG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
