Hello, I recently finished the receiver portion of my K1 (40m/20m). I successfully aligned the 20m filters, but on 40m there is very little noise, and the noise does not change when there is an antenna connected. However, I have received some very nice signals on 20m.
I have inspected the filter board joints and checked the relays to verify they are in the correct position. From the troubleshooting, it appears the only option left is to check the crystals, but I do not have an oscillator handy. I am now wondering how to verify the 40m crystal is working properly since I only have a digital multimeter. I was thinking an RF probe would be helpful for this, and I could definitely build that. I appreciate any help. Sincerely, Jeremy Klotz KD9BPB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
