There is no advantage to using the I/Q output for fldigi. It only cares about one channel, so use the regular audio output.
wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Dec 2, 2016, at 12:25 PM, Jim Brown <[email protected]> wrote: > > On Fri,12/2/2016 12:15 PM, Don Wilhelm wrote: >> Fldigi and other similar applications only use the left channel. > > Yes. MMTTY can be set to decode L or R, but only transmits Mono. 2Tone (an > excellent RTTY program) can easily be set to RX and TX on L or R. WSJT-X can > easily select L and R for both TX and RX, but WSJT10 is left channel only. > Development of WSJT has shifted to WSJT-X, with more modulation schemes added > to WSJT-X as time goes by, and it is intended to eventually replace WSJT10 > for all modes. Before you fall in love with any digital mode software, check > out its limitations in this regard. > > 73, Jim K9YC > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
