Digital with the K3 is much like with other rigs but with a few
differences
Im not sure if you have a K3 or K3s but neither need a signal link
but they can be used. the K3s has a built in sound adapter that can
is used through the USB port. with an older K3 you can use any sound
adapter including the one built into most computers and connect it to
the line in and out on the rear of the K3, it has internal isolation
so this function of a signallink is not really needed.
For software you can use what ever you chose be it FLdigi HRD or
MMvari or whatever you prefer. setup is a little different regarding
driving the rig. with most rigs you want to drive it with no ALC
meter deflection. with the K3 however it should be with the fourth
bar showing and flickering the fifth bar. you then adjust your
output power with the power adjustment. runining digital with a K3
it is possible to run much more power out than with most conventional
rigs. this setup makes the K3 in my opinion a fantastic rig for
digital modes.
there are alot of fine points using the different digital settings on
the rig. so the manual will be a must if not Fred Caddy's book.
which is highly recommended.
David Moes
VE3SD
--- Original message ---
Subject: [Elecraft] Digital on the K3S
From: Bill DeVore <[email protected]>
To: <[email protected]>
Date: Tuesday, 29/11/2016 10:26 PM
I'm new to Elecraft and was wondering how most of you handle digital
communications.
Use the K3 Utility program for digital modes or something like
SignalLink USB with fldigi or equivalent?
Bill - W3PNM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
