...The SWR on a line is determined entirely by the match between the line and the load -- when we're transmitting, that's the antenna, and when we're receiving, it's the receiver. And yes, it's same everywhere along the line as long as the line is uniform -- that is, the same impedance, and with no stubs or matching networks.
73, Jim K9YC And the losses are low. Losses go up with increased SWR on a given transmission line and losses reduce the SWR measured at the load. (I neglected to make that point in my last post and couple of sharp-eyed readers caught it.) 73, Ron AC7AC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
