Thanks. -----Original Message----- From: Mark E. Musick [mailto:[email protected]] Sent: Sunday, July 17, 2016 5:58 AM To: Dick Lindzen; 'Reflector Elecraft' Subject: RE: [Elecraft] Did calibration
With the firmware upgrade the VFO linking was moved from the sub receiver button to the config menu. Look in the firmware upgrade notes. There you will find the information you need to link the VFOs. Mark Musick, WB9CIF -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Dick Lindzen Sent: Sunday, July 17, 2016 5:19 AM To: Reflector Elecraft <[email protected]> Subject: [Elecraft] Did calibration The power issue was solved with a calibration. Any suggestions for the inability in link vfo's? 73, Dick, WO1I K3 911 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
