The 2kW monitor works pretty well at 100 watts. The 200W sensor might
have a little better accuracy at 100W and works much better for QRP.
If by "images" you mean seeing the same signal on either side of center
of the pandapter display, that doesn't happen with the P3. Unlike SDR
receivers and panadapters that use an analog I/Q downconverter, the
digital downconverter in the P3 is "perfect" in that respect.
Alan N1AL
On 07/01/2016 11:59 PM, [email protected] wrote:
Hi group,
I have a K3 100 Watt and i bought a P32 with VGA and TXmon, the TX Monitor
is 2 Kw.
I was thinking because of the fact that I am only working with 100 watt
would it be worth reducing the sensor to 200 Watt ??
1 I don't know if it is possible.
2 I don't know if I see beter images then ??
3 or should I just leave it as it is ??
I did not yet connect the TXmon just trying to learn the possibilities of
the P3
Regards William
K2, KX3, K3, P3,
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
