Various people wrote:
VOX on?
You need some way for MMTTY to switch the K3S between receive and transmit.
Sigh.... Please excuse my frustration.
My original posting was clear: MMTTY _is_ putting the K3s into transmit
and _is_ sending tones to the built-in sound card. I can hear the tones
when the K3s is in XMIT, but no RF comes out the antenna connector.
The red TX LED on the K3s turns on, and the RF bar graph displays one
bar, or zero watts. I can hear the tones in the K3s speaker and phones
plugged into the rear panel.
There is no need for VOX -- MMTTY puts the K3s into XMIT if PTT is
turned on _and/or_ if VOX is turned on.
Everything is fine except the K3s is not transmitting the audio from the
built-in sound card.
I'll keep trying.
--
73, Mike N4CF
Louisa County, VA USA
Elecraft K3s/100
Carolina Windom up 45'
http://n4cf.mdodd.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
