I would find a KX3 utility program targeting the Pi to be helpful too. I would find it especially helpful if the KX3 utility was made open source, then we could compile it for any platform we wish. Plus, I could take care of a certain, irksome programming error...
On Thu, 2016-04-07 at 15:50 +0100, Andy McMullin wrote: > Hi All, > > I’ve had a go at searching back through the archives, but couldn’t find the > question being asked, let alone the answer so here goes…. > > The Linux versions of the utilities are for an X86-based machine. Has anyone > asked for them to be recompiled for an ARM machine? In particular, now that > the Raspberry Pi 3 is about — with astounding performance for the price (at > only £25) — for Raspbian? > > I’ve got my Raspberry Pi 3 running WSJT-X and FLDIGI just fine to my KX3. > With a small screen and suitable supply it makes a fine 12v-based portable > system. It would be nice, therefore, if I could also use the same small > machine for any firmware updates, Macro settings and to work CW etc direct > with the KX3. > > BUT, is it just me? Anyone else interested? > > — > Regards > Andy, G8TQH > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to crustac...@brig-elec.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
