hi all, I am working on the RF board, page 65 where a lot of capacitors are to do. The first problem I had was C22 (3.3pF), which I could not find. I found a capacitor with 2.2 on it, which I used after reading the parts list, but now I am at C33, which should also be 2.2 but nothing around.
I have left one capacitor labeled "I2I" which is probably 121, one is labeled only with a "I" , not sure if this is a real label or not, the others left are not a choice. My DMM has a capacitor mode, but I don't get reasonable values if I try to measure these capacitors. I have one part which looks like a capacitor it is a small blue cap, little smaller than the 470 caps, labeled with 2.7C - what is this? How can I find out which value is the not labeled capacitor? from the brown ceramic c's there is left: 33 4x 12 1x I2I 1x 39 1x 68 1x 27 1x 10 1x I (?) 1x blue ceramic c's 2.7C 1x and several other blue ones which are clear to me. 73! de Werner OE9FWV -- Wenn der Schutzmann die Arme gespreizt hat, will er damit verkünden, dass er gerade keinen fahren lässt. Email powered by Pegasus Mail free at <http://www.pmail.com> Homepage: <http://www.qsl.net/oe9fwv/> Fone +43 5522 75013 Fax +43 820 555 85 2621 Mobile +43 664 6340014 Elecraft K2 #5203 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
