Hi: If you have the KRX3 sub receiver installed, start with removing it according to the KXV3B installation instructions and wait to put it back after you have done the others. If you don't have the KXV3 sub receiver it won't make any difference when you do that update.
Do the KXV3B at the same time as the KIO3B. You will have easy access to the KXV3B with the KIO3 main board out so after removing the KIO3 board per the instructions go ahead with replacing the KXV3B. 73, Ron AC7AC -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Hisashi T Fujinaka Sent: Saturday, January 2, 2016 1:47 PM To: [email protected] Subject: [Elecraft] KBPF3MDKT, KIO3B, KXV3B install order? Hoping someone has done this already, but the KVIO3B is still pretty new. I'm about to start reading the inserts, but wondering if anyone has any suggestions as to installation order into my K3. (Yeah, I know it was more expensive to do this way, but it's my hobby. I'm not doing it to maximize the money I have, I'm doing it to maximize the fun I have fiddling with my radio when the bands don't appear to be cooperating.) :) -- Hisashi T Fujinaka - [email protected] BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
