Thank you for comments. I amy indeed use ` by chance although I have not done SO2V by choice.
N1MM claims a bug in K3. This is in http://n1mm.hamdocs.com/tiki-index.php?page=Supported+Radios#K3_and_K3S: *The K3 contains a firmware bug that was reported several times and never been fixed which affects users who would like to use PTT via radio command. If the Esc key is pressed when a CW transmission begins and you are using PTT via radio command, the radio may not return to RX. The radio RX issue doesn't occur if the owner disconnects the CW jack from the rear of the K3 radio and doesn't change any N1MM Logger setting. Similar issues have been reported on other modes. Delay has been added to the N1MM Logger program when Esc is pressed but the problem still occurs intermittently. The problem seems to be worse with the very early K3 radios. Until this firmware issue is corrected, users may notice that the radio does not return to RX intermittently when using PTT via radio command. When this occurs, make another transmission and end it with the ESC key.* Ignacy, NO9E -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-N1MM-freq-jumps-etc-in-CQ-WW-CW-tp7611005p7611033.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
