Jer,
If you are thinking of putting the cover on without moving the K3S or
collapsing the tilt stand, I would allow an additional 1/2 to 1 inch -
that allows the rear seam of the cover space to be manipulated.
OTOH, if you will be moving the K3S out, putting the cover on and then
pushing it back in place, I would think 1/4 inch additional would be
sufficient.
73,
Don W3FPR
On 9/12/2015 5:03 PM, [email protected] wrote:
Thank you.
Any idea how much space I need between the top of the rig and the bottom
of the hutch to be able to get Rose's dust covers on?
Thanks.. I need to look at my dimensions a bit.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
