I have access to signal generator similar to this ( http://www.circuitspecialists.com/sdg830.html), but its minimum output is 4mv. The calibration calls for 50uV of signal. It looks like I could set the output to 40mv (I don't like working at the bottom of the range), and then attenuate the output with 3 20db attenudators (e.g. http://www.fairviewmicrowave.com/20db-fixed-attenuator-bnc-male-bnc-female-0.5-watts-sa01b-20-p.aspx) in series which would reduce the voltage by a factor of 1000. Does this sound like a viable plan?
-Doug-, KD7DK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
