Steve, There are only 4 signals (AUXBUS, 8R, VRFDET, and 12CTRL) to deal with, so only 5 conductors are needed. The cable supplied with the KPA100 or the KIO2 normally used for the computer connection (4 C + shield) will do the job if you use the shield as the ground connection. Since you need both the KIO2 and the KPA100 to mount the KPA100 externally, you should have 2 of these cables already.
73, Don W3FPR > -----Original Message----- > > For those of you who have built your KPA100 in an EC2 > (as a two-box configuration) what type cabe did you > use to fabricate the interconnect? And, more > importantly, why did you select whatever cable you did > use? For example, did you use what was readily > available, or did you buy a particular cable expressly > for the purpose? > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
