Hi Tighe, I was able to repeatedly duplicate what you described. I think you found a bug.
First, we should get the nomenclature correct. You don't mean "VFO A Marker" you mean "VFO A Cursor". And the problem only occurs in Tracking mode. And the problem is not just caused by pressing the Spot button. If you gently twist the VFO A dial the center frequency on the top of the SVGA screen changes and the VFO A cursor jumps to the center of the screen on the external monitor. The P3 display remains as it was. In addition to toggling FixTrack you can also clear it by a very slight turn of the P3 knob if the center frequency shift function is still active. A slight turn will make the VFO A cursor jump back to where it was set at the side of the screen. Others may not have noticed it because the whole idea of having the VFO A cursor not in the center of the screen really cries out for Fixed Tune mode rather Tracking mode. 73, Mike K2MK Tighe Kuykendall wrote > Just noticed something odd with the latest P3 SVGA code (1.35/1.22). > > Am split on 80m. Held the P3 button for "Center" and rotated the knob > so VFO A was closer to the left side of the screen then tapped the > button again. All was fine until I tapped Spot on the K3. Then the VFO > A marker on the SVGA moved to the center frequency, not the VFO A freq. > The P3 is still displaying correctly. Toggling FixTrack got it back > in sync, but it's repeatable. > > Tighe > NK4I -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-SVGA-in-Split-tp7598013p7598024.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
