I reloaded the current non-beta version. Not having P3 working is not worth playing with betas.
jim ab3cv On Tue, Feb 3, 2015 at 1:52 AM, Gerald Manthey <[email protected]> wrote: > I could not use the latest beta either. I had to go one beta back. > Gerald KC6CNN > On Feb 2, 2015 7:46 PM, "Jim Miller" <[email protected]> wrote: > >> Decided to try the latest beta P3 firmware. All loaded including FPGA. >> >> SVGA output is frozen and P3 is updating very slowly. >> >> When I turn the SVGA display enable off the P3 behaves "normally" with a >> proper update rate. >> >> I've removed power from the P3 completely and restarted it with no >> improvement. >> >> Is there something else I need to do? >> >> It was working well before this. >> >> jim ab3cv >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
