Hi Don, It's a slow summer day so I thought I would throw a keyboard onto my P3/SVGA and give it a try. It works fine here as long as VOX is showing on the K3 display. QSK can be on or off but VOX must be visible on the K3 display.
And yes, if VOX is off you'll still hear the CW in the K3 monitor. I call this the code practice mode. 73, Mike K2MK ac2ev wrote > I tried using a keyboard and the P3 in data mode to send CW but it > wouldn't put the K3 in transmit. I could receive and decode CW. When I > tried to transmit a memory location or via typing I could hear the CW it > was trying to send. The P3 displayed TX indicating it was in TX mode. But > the K3 was not in transmit. > > Looking through the manual it wasn't immediately apparent what I was doing > wrong. > > 73 > AC2EV - Don -- View this message in context: http://elecraft.365791.n2.nabble.com/CW-using-P3-help-tp7591664p7591665.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
