Scott,
There is a jumper in the SignaLink USB you can set
to provide more RX audio out. Using Digipan 2.0 I
didn't need to do that with my K3. But I've never
tried Fidigi.
73, Phil w7ox
On 4/20/14, 6:31 PM, Scott via Elecraft wrote:
Hi all,
The bands were dead here today so I started working on getting the new
signalink working. I usually run flrig with fldigi on my macbook pro hooked
directly to the K3. I got the signalink for a new laptop. I start flrig and
let it stay in the background while I work with fldigi. Everything works fine
this way.
Here's what's happening: the signalink will key and un-key the K3 just fine.
Fldigi will key the K3, transmit and receive normally, but the signalink un-key
fine, but the K3 does not un-key unless I push the xmit button, and then it
will change to receive. Flrig keys and un-keys the K3 just fine.
I haven't tried using the signalink without frig.
As well, the waterfall is very light. I turned up the line output to 20, with
receeive knob at middle turn, but it is still light. Lots of signals are
decoded but there are few traces.
Any help out there?
Thanks, Scott. AA0AA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
