HI Dwight, You hook it to Bypass In. In order to use the receive antenna, the PR6 needs to be turned off. If you are using DIGOUT1 to control the PR6, it may not be turning off when DIGOUT1 is off is you have the KAT500 and KPA500 and are using the KPAK3AUX cables. Cheers and 73, Fred KE7X
"The Elecraft K3: Design, Configuration and Operation 2nd ed" "The Elecraft KX3 - Going for the summit" www.ke7x.com or www.lulu.com KPA500 and KAT500 Quick Set Up Guide http://www.ke7x.com/home/k-line-introduction-and-set-up-guide (Coming soon: "The Elecraft KPA500 and KAT500 - the K-Line Dream Station") > -----Original Message----- > From: [email protected] [mailto:elecraft- > [email protected]] On Behalf Of DGB > Sent: Friday, April 11, 2014 3:21 PM > To: [email protected] > Subject: [Elecraft] PR6 Hookup > > when hooking up the PR6, which do I connect my 160m rcv antenna to, the > bypass out or in? > > tnx 73 Dwight NS9I > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
