Hi Chuck I run my KDSP2 all the time, and vary the NR setting according to the noise I hear. Sometimes I get improved results by adding the Attenuator or the Preamp. It all depends on the type of noise and its amplitude relative to the desired signal. You really do have to experiment a bit to find the best settings at any given time.
The tightest IF selectivity and DSP selectivity often make a big difference too. Try everything and see what works best in your situation. Good luck and 73 Bob N6WG The Little Station with Attitude -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Chuck Mabbott Sent: Monday, November 21, 2005 3:41 PM To: [email protected] Subject: [Elecraft] K2: DSP for CW ? - Curious K2 Question [cause I don't know] Past experience with 'other' DSP options and CW if I have a CW signal buried [way] down in the noise level and DSP is activated the CW signal will sometimes be cut back or disappear along with the noise. So just out of curiousity how does the K series work with respect to you can here the signal faintly amidst the noise levels? --- Chuck AA8VS "Do not fear the enemy, for your enemy can only take your life. It is far better that you fear the media, for they will steal your HONOR. That awful power, the public opinion of a nation, is created in America by a horde of ignorant, self-complacent simpletons who failed at ditching and shoemaking and fetched up in journalism on their way to the poorhouse." --Mark Twain. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
