On 1/22/2014 02:05, John Marvin wrote: > Bob, > > You should try installing the W2 utility
Just went and D/L. Thanks . XV-50 into a dummy-load: K3-Drive W2-UTil XV50 Bars W2-Box-LED 0.1mW drive 0.50W on W2 2 bars ((2W) 0 0.2mW drive 0.83W on W2 4 bars ( 5W 0 0.3mW drive 1.42W on W2 5 bars 7W 1 1watt 0.4mW drive 1.90W on W2 6 bars 10W 1 1watt 0.5mW drive 2.41W on W2 6 bars 10W 2 2watt 0.6mW drive 3.02W on W2 7 bars 15W 3 3watt 0.7mW drive 3.66W on W2 8 bars 20W 3 3watt 0.8mW drive 4.23W on W2 9 bars 25W 4 4watt 0.9mW drive 4.81W on W2 10bars 30W 4 4watt 1.0mW drive 5.35W on W2 10bars 30W 5 5watt 1.5mW drive 8.80W on W2 10bars 30W 8 8watt So, as you see, nothing agrees with anything. Note: I am not a test-lab and have little in the way of measurement equipment. Coaxial-Dynamics in the PA output. However, 500/1000 watt slugs. But, the XV50 drives the 180w 6m brick to an acceptable low limit (based on XV50 drive). The Brick drives the PA to 1250W .. so I can't complain in that regard. Just wanted to monitor/see the output of the XV50 and can't seem to do it. -- Bob KD7YZ http://www.qrz.com/db/KD7YZ www.denstarfarm.us/LGD ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
