Paul,
You need to configure your router/firewall to forward the port used by
the ES-257 from the router to the device. You will need to assign a
static IP to the device. Serial port 1 uses port 9001, serial port 2
uses port 9002. Look at your router documentation and search the web for
port forwarding info.
73,
John NI0K
------ Original Message ------
From: "Paul A DeFelice" <[email protected]>
To: [email protected]
Sent: 1/5/2014 9:47:46 AM
Subject: [Elecraft] K3/0 Remote setup and Brainboxes
As part of my remote setup, I purchased a Brainboxes ES-257 2 Port
RS232
ethernet to serial adapter to control a couple of serial port
accessories. I
can control the ES-257 and the attached equipment using their Boost.LAN
Manager software over my LAN but cannot get the device configured to
accept
control using my external IP. Any suggestions or direction would be
much
appreciated.
73,
Paul K9NU
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
