Not an AL-811, but I've used an AL-1200 with my K3. I used an RCA cable for amplifier keying and a PL-259 jumper for RF.
I did not connect ALC, I instead adjusted the K3's power output as appropriate. 73 de Dick, K6KR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Friday, December 13, 2013 10:02 AM To: [email protected] Subject: [Elecraft] K3 to Al-811 Amplifier Hi Guys, I would like to hook up my K3 to an Ameritron Al-811 Amplifier. I assume that I connect the K3 output to the Amplifier Input. An the Keying Cable that is in the back to the Relay Plug on the Al-811? I see an ALC Output and ALC Adjustment knob. But I probably don't need to use those. But then again I could be wrong. Has anyone used the AL-811 with the K3? Thanks in advance. Mark Griffin, KB3Z ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
