Guys - thanks for all the helpful info. I had completely forgotten that the K3 can, when used in conjunction with the KPA500, use two RF output settings per band: one with the amp on and another with it off. Dave was right on - set it to 100 watts (or whatever) with the amp off, and with the amp on, set it to something less than 201 watts. Perfect!
73, Jim / W6JHB On Wednesday, Oct 16, 2013, at Wednesday, 7:28 AM, Cady, Fred wrote: > The other thing you can do if you have the KPAK3AUX cable installed is to use > the INHIBIT function (if you are not using DIGOUT1 to control a PR6 preamp). > In the KPA menu, set INHIBIT to ENABLE, then in the K3 config menu set > DIGOUT1 ON when you are on 30 meters. The problem with this solution is that > if you are using DIGOUT1 ON to turn on the PR6 preamp it will inhibit the amp > on 6 meters too. > Dave's solution below is the better way to go. > Cheers, > Fred > KE7X > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
