What software are people using for the JT65 mode? I would like to
possibly start tinkering with JT65 and have WSJT9 installed. There do
not seem to be any options for using CAT to key the K3. I see an option
for a PTT port and buttons for selecting DTR or RTS. I already have an
RS-232 cable from my computer to P3-K3 and would prefer not to have to
use a separate port for PTT (or to use VOX). I have tried setting it to
port 1 which is my CAT cable to the P3-K3, and tried both RTS and DTR
but neither one works. Is there a setting in the K3 that needs to be
changed?
Just wondering if there is other software for JT65 with the option of
using CAT, or if I am missing something in the configuration.
Thanks,
MIke
KI0HA
On 9/26/2013 22:52, Frank Precissi wrote:
Hi Greg,
I do a ton of digital with my (new) K3 so I figure I could chime in with
what my setup is since yours will probably be really close.
For keying, I use CAT keying. The really nice
thing about the K3 is:
Keying can be accomplished by either on-rig VOX or CAT/RTS/DTR. VOX is the
only one that doesnt require a connection from the K3 to the computer via a
USB/Serial cable.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
