I cannot find it on the schematic either, but I looked at the board scans on Tom Hammond's webpage and it looks like it is a bypass on the T SENSE signal - at least it appears to my eyes as though one side goes to the ground plane and the other side connects to collector of Q3. With the actual circuit board in your hands (instead of the scanned image I was looking at), you should be able to determine which circuit it actually is in.
Install it even though it is not included on the schematic. The KPA100 is know to work fine with it installed. 73, Don W3FPR > -----Original Message----- > > Working my way through the assembling of the KPA/100 I am unable > to find the capacitor C50 in the schematic on page 64/65 in the > manual. Please? > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
