I tried the XG3 with the biggest signal on it and I still have the mirror image. Do I tune right to the big signal and then move away?
Ariel NY4G Sent from my iPad On May 31, 2013, at 11:11 PM, "Tony Estep" <[email protected]> wrote: > On Fri, May 31, 2013 at 9:46 PM, Ariel Jacala <[email protected]> wrote: > >> I get a dual image on my NaP3 display.... > > ============== > Ariel, sometimes NaP3's I-Q autobalancing gets discombobulated. It can be > cured very simply by putting in a very big carrier, S9+40 or so. I have my > XG-3 connected to the receive antenna input on the K3. When my NaP3 gets > out of sorts (not frequent, maybe once a month) I switch over to the RX > Ant, turn on the XG3 to the 0 dBm level, and tune the receiver to about 40 > Khz away from the signal. This fixes the display immediately. > > This presumes that you do have the sound card and everything else set up > correctly. If you do, this simple trick will wake up NaP3's autobalance, > which will eliminate images from the display and make it perform perfectly. > > Tony KT0NY > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
