That should be OK but quite the rats nest. :) I would suggest either an HD15 breakout board from Winford Engineering or see if you can find one of the LDG RCA breakout boxes. I have one of these and it works great for accessing ACCY connections.
73 Greg On 5/13/13, ik1bxn <[email protected]> wrote: > Hello you all ! > > Currently I have my k3 connected via an "Y" DB15 cable to KAT500 and cable > and PR6. > Now I'm purchasing a MicroHam DigiKeyer that needs to be connected to k3 > DB15 connector too and uses pins 1-4-5 for FSK and PTT. > At the moment I have no place to plug DigiKeyer DB15 connector to. > I wonder if it will be correct to purchase an additional "Y" DB15 and > connect it in "cascade" to the "Y" I already have. > The scenario it should be : > 1st "Y" plugged to k3 and having one end to KAT500 and the 2nd end to feed > the 2nd "Y". > 2nd "Y" will feed PR6 at the 1st end and MicroHam DigiKeyer at the 2nd end. > Should it be correct ? Should it create any problem or damage ? > > Hoping to have been clear enough, thanks a lot for support > > Best 73 > > Giorgio - IK1BXN > > > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/k3-kat500-pr6-DigiKeyer-via-2-Y-cable-in-cascade-should-be-OK-tp7573626.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
