Microphone muting is not a problem. When SSB VOX and CW VOX are both enabled, we can hear the CW-in-SSB logic working correctly: whichever mode of transmission is triggered first, that mode "wins" and input for the other mode remains muted until the VOX drops out.
The problem specifically involves the use of manual PTT (microphone button, XMIT button or foot switch) which completely blocks the CW input. 73 from Ian GM3SEK >-----Original Message----- >From: Pierfrancesco Caci [mailto:[email protected]] >Sent: 09 May 2013 12:58 >To: Ian White >Cc: [email protected] >Subject: Re: [Elecraft] [K3} CW in SSB - no manual PTT? > >>>>>> "Ian" == Ian White <[email protected]> writes: > > > Ian> When using the "CW in SSB" feature [1] my K3 will transmit CW using >semi > Ian> or full breakin, but not when using manual PTT. The footswitch and >the > Ian> XMIT button will switch the K3 into transmit, but then the CW keying >is > Ian> blocked. > > Ian> Is this a configuration error on my part, or a firmware bug? > > >wouldn't you get microphone audio mixed with the CW tone if you'd allow >PTT to work? > > >-- >Pierfrancesco Caci, ik5pvx ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
